Do we know what the most common home electrical problems are? Do we know how to fix them? If not, here are the most common electrical problems and what we can do to repair them.
-
Short Living Light Bulbs
There are different ways that light bulbs could malfunction. The most common of them being light bulbs that burn out quickly. Contrary to popular belief, this isn’t usually caused by the wrong type of wattage or because of an error in wiring. In most cases, the problem can be traced back to a brass tab in the socket. However, if a light bulb is screwed in too tightly, it can press the brass tab down and cause it to stay that way. an electrical circuit is cut and the light bulb doesn’t receive any electricity. Replace these as often as needed.
-
Dead Outlets
Sometimes an outlet will stop working, or just suddenly go dead. There can be a few causes for this. The first is a poor connection. If the entire outlet is dead and you’ve tried resetting the breakers for that outlet, then the problem may be in an opening somewhere in the wiring. If you are having problems fixing this, call in the professionals at Any Hour Services, Electrical, Plumbing, Heating & Air to help.,/li>
-
Randomly Tripping Breakers
\
Sometimes a circuit breaker will trip off when certain appliances are used. This usually happens with hair dryers and microwaves, or other high-wattage items. This is because the system is protecting itself from the overload of electricity required to run these appliances. Sometimes, the circuit cannot handle that much power, so it trips the breaker to keep any problems from arising. Most high-wattage appliances have a low-wattage setting. If they do, switch to the lower setting to avoid the breakers tripping off when using these appliances -
Wall Switch Problems
If a switch gets warm, then there may be a problem. However, if the switch is a dimming one, then it may be normal. Often times, dimming switches run around 600 watts or less worth of lights, so the heat is normal. If the heat is coming from a receptacle, then there’s a problem with a connection at its location and needs to be fixed.
-
